Door Telephone; Technical Data - Niko 16-601 Manual Del Usuario

MODULES

4.3. Technical data

Dimensions: ................................................. L 100 x H 50 x W 80mm
Weight:........................................................ 324g
Operating temperature: ................................ -20 to 70°C
Enclosure: ................................................... aluminium (enamelled)
Push surface (16-600): ................................ brushed and anodized aluminium
Transparent cover cap (16-600-01): ............. scratch- and UV-proof polycarbonate
Protection against dust and water: ................ IP44
Connector: ................................................... 34-pole: connection to other modules
Contact: ...................................................... N.O. max. 1A/12V~
# push buttons: ............................................ max. 5 on one intelligent ring module

5. DOOR TELEpHONE 16-611

5.1. Description
The door telephone module is provided with a loudspeaker and microphone. The door telephone
module is used in combination with other modules from the range Access Control Design.
5.2. Installation
Connect the door telephone module to the flat cable. First mount the modules that have to be placed
on top of the door telephone module. Connect the flat cable and mount the module in the external
unit by means of the 4 supplied screws (see '2. Mounting the modules').
The volume of the loudspeaker is preset and suffices in most situations. The volume of the loudspeaker and
microphone can be adjusted with the 2 potentiometers in the 16-651 (see user manual 16-651).
5.3. Technical data
Mounting height: .......................................... ±1m48 (from ground to top of module)
Dimensions: ................................................. L 100 x H 50 x W 80mm
Weight:........................................................ 341g
Operating temperature: ................................ -20 to 70°C
Loudspeaker: ............................................... 1W, moisture-proof
Microphone: ................................................ preamplified (type electret)
Enclosure: ................................................... aluminium (enamelled)
Protection against dust and water: ................ IP44
Connector: ................................................... 34-pole: connection to other modules
En 47