Lutron PHPM-PA-DV-WH Manual Del Usaurio página 3

Load Type Capability
Phase-Adaptive Power Module
• Incandescent (tungsten)
• Halogen
• Magnetic low-voltage transformer (iron core)
• Electronic (solid-state) low-voltage transformer
• Lutron Tu-Wire electronic fluorescent dimming
® ®
ballast
• Neon/cold-cathode
3-Wire Fluorescent Power Module
• Lutron Hi-lume , Eco-10
®
SE, EcoSystem , and EcoSystem
®
line-voltage controlled electronic dimming ballasts
Switching Power Module
• Incandescent (tungsten)
• Halogen
• LED
• CFL
• Magnetic low-voltage transformer (iron core)
• Electronic (solid-state) low-voltage transformer
• Magnetic and electronic fluorescent lamp ballasts
• Neon/cold-cathode
• HID
• Motor
1
– 1 ⁄ HP at 277 V~
2
– 1/2 HP at 120 V~
Product Compatibility
Only 120 V~ versions of the following Lutron
products may be used to control these power
modules:
• GRAFIK Eye QS control units
®
• GRAFIK Eye 3000 Series control units
®
• LP, LCP, GP dimming panels
• HomeWorks remote power panels
®
(Eco Series), Compact
®
Compact
®
®
Test Load for Short-Circuit
• Turn power OFF.
• Phase-Adaptive/Switching: Connect standard
switch be tween Line/Hot lead and the load wire
to test circuit.
• Fluorescent: Connect standard switch between
Hot/Live lead and the Dimmed Line/Hot and
switched Line/Hot leads of the ballast.
• Turn power ON and check for short or open
circuits.
Phase-Adaptive/Switching
Line/Hot
Neutral
3-Wire Fluorescent
Line/Hot
Switch
Ballast
Neutral
Switch
Load
Orange
Black/Brown
Power Modules 3