Diagnostics And Troubleshooting - Lutron PHPM-PA-DV-WH Manual Del Usaurio

Diagnostics and Troubleshooting

Phase-Adaptive Power Module (PHPM-PA)
Module Status
Green LED Action
OFF
1 blink/second ("heartbeat")
10 blinks/second ("heart-attack") Protection Mode. See Output Status
Output Status
Red LED Action
Normal Operation
OFF
Continuously ON
1 blink/second ("heartbeat") ON
Protection Mode
1 blink, pause, repeat
2 blinks, pause, repeat
3 blinks, pause, repeat
4 blinks, pause, repeat
10 Power Modules
Description
Module not powered.
WARNING. Shock Hazard.
May result in serious injury
or death. Control input may
still be powered. Turn OFF all
breakers before removing unit.
Module powered; normal operation
LED codes below.
Control Input Load
Status Status
Input signal OFF OFF
or disconnected
ON ON
ON
ON OFF
ON OFF
ON ON full Shorted component
ON OFF
Description/Problem
Load OFF
Incandescent/electronic
dimming
Magnetic dimming
Load short-circuit
Over-voltage error
Load Overload
Module Status Output Status
LED (Green) LED (Red)
Solution
—
—
—
Remove power; repair fault;
re-apply power
Verify proper load on output
Internal device is damaged;
replace power module
Remove power; reduce
load; re-apply power