Setting The Controls; Operation Without A Mtwist Dial; Power Off; Panel Lock - Bosch NES 7 UC-30 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NES Cooktop Use and Care Manual
Operation Without mTwisT Dial
The cooktop can be operated without the mTwisT
dial.
1. Turn off Panel Lock (see below).
2. Touch element pad for desired element. Display
shows 0.
3. Choose the POT SIZING pad (if using dual ele
ment).
4. Touch element pad repeatedly until desired heat
settting is displayed.
Change Heat Setting
1. Select element pad for desired element.
2. Each touch of the element pad changes setting.
Continue touching repeadedly until desired heat set-
ting is displayed.
Cooktop Function Pads

Power Off

Turns off all elements at the same time. The indicator
light above the POWER OFF pad is lit when at least one
element is on. The light will turn off when the POWER
OFF pad is touched or all elements are turned off.

Panel Lock

The panel lock is selected to prevent the cooktop from
being turned on, such as for cleaning. The elements
will not function when turned on.
Setting Panel Lock
1. Touch and hold panel lock pad for three seconds.
A light above the pad stays lit when the panel is
locked.
To unlock: Touch the panel lock pad and hold for three
seconds. The light above the pad will disappear.
The cooktop cannot be locked when a surface element
is operating. It is recommended to lock the cooktop
before cleaning.

Pot Sizing

Use this pad to choose the pot size on dual elements.
1. Touch element pad for dual element. Control
defaults to larger element. Dual element light
comes on above element pad indicating large
size is selected.
2. Touch pot sizing pad to change to smaller ele
ment. Dual element light will turn off.
3. Turn mTwisTdial to desired heat setting.
To change element size for different size cooking
pot when the element is on:
1. Touch element pad. Display will show 0.
2. Touch Pot Sizing pad to change element size cho
sen, element turns off.
3. Turn mTwisT dial to desired heat setting.

Setting the Controls

Change Pot Size - (for dual elements only)
1. Select element pad for desired element.
2. Touch Pot Sizing pad for desired pad.
3. Touch element pad until desired heat setting is
Turn Off Element

Keep Warm

Each element has a keep warm setting to keep hot,
cooked foods at serving temperatures.
To set Keep Warm feature:
1. Touch element pad for desired element.
2. Touch Keep Warm pad. L is displayed above se
Keep Warm Guidelines
Use pans/utensils with fl at bases. Plates and casse-
roles with shallow ridges around the base can be used
provided they are made of heat-safe materials.
Keep dish covered to keep foods hot.
Choose pans and cookware that may be safely used
on a hot surface. Example: Use CorningWare® "Safe
for Rangetop" rather than Pyrex® which is not recom-
mended for cooktop use.
Use a trivet or steamer inside a pan when necessary
to raise food off bottom of pan.
PAGE 6
Cooktop Operating Instructions
displayed.
1. Touch element pad.
2. Touch element pad until 0 is displayed.
Or
for several elements, select Power Off pad.
lected element and element comes on.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nes 9 uc-36

Tabla de contenido