Incoming Calls; Activating/Deactivating Hands Free Mode - Topcom Sologic B901 COMBO Guia Del Usuario

Using the cordless handset
4.2 Outgoing calls
Making a call
4 5 6
G J M
H K N
I L O
Call preparation
4 5 6
G J M
H K N
I L
O
Redialling the last telephone number called

4.3 Incoming calls

When an incoming call is received, the handset and the base station
ring and the "Visual call signal" LED (see point 14 in figure 3 and
point 27 in figure 4) flashes on the handset and base station.

4.4 Activating/deactivating hands free mode

During the call:
12
1 Press the call button.
2 Enter the telephone number.
3 Press the hang up key to end the call.
1 Enter the telephone number.
You can correct a wrong number using the mute key.
If you do not press any key for 10 seconds, the
number disappears and the handset reverts to
standby mode.
2 Press the call button.
The telephone number is automatically dialled.
3 Press the hang up key to end the call.
1 Press the call button.
2 Press the redial button.
The last telephone number is automatically dialled.
3 Press the hang up key to end the call.
1 Press the answer call key to answer the call.
2 Press the hang up key to end the call.
1 Press the hands free key to activate the function.
2 Press the hands free key again to switch the call
back to the handset.