Publicidad
Idiomas disponibles
Idiomas disponibles
TEST ThE STABILITY OF ThE INSTALLATION BY TUGGING ON FORk LEG.
If forks move out of the skewer —
Open lever and tighten the nut
slightly. you may need to loosen or
tighten the nut so that lever closes
firmly with resistance.
use non-water soluble lubricant on bolts. use a soft cloth with water and mild detergent to
clean plastic parts. not recommended for use with drive through car washes.
1033569C-4/12
If pod can rotate —
Remove the skewer and pod cover,
and tighten the screws. Always
replace the pod cover.
Weight Limits
35 lbs./16kg per bike (Round Bars)
MAintEnAnCE
REMOvE RACkS BEFORE EntERing An
AutOMAtiC CAR wASh
tO OBtAin A COPy OF thiS wARRAnty, gO OnLinE tO www.yAkiMA.COM
k E E P
T h E S E
thiS PRODuCt iS COvERED By yAkiMA'S
"LOvE it tiLL yOu LEAvE it" LiMitED LiFEtiME wARRAnty
OR EMAiL uS At yAkwARRAnty@yAkiMA.COM, OR CALL (888) 925-4621
I N S T R U C T I O N S !
If the wheel is loose in the tray —
Pull down on the strap ends. (Some bike wheels may be
too narrow to allow a tight fit. the bike is still secure.)
tray can rotate on the bar to adjust to wheel. After
adjusting, tighten the hex key.
wARning
Attachment hardware can loosen over
time. Check before each use, and tighten
if necessary. Failure to perform safety
checks can result in property damage,
personal injury, or death.
iF yOu nEED FuRthER tEChniCAL
ASSiStAnCE OR REPLACEMEnt PARtS:
Please contact your dealer or call us at (888)
925-4621, Monday through Friday, 7:00am to
5:00pm Pacific time.
Publicidad
