Operating Instructions; Starting Up The Dvdpak2; Turning On The Monitor And The Dvdr; Turning Off The Monitor And The Dvdr - RIDGID SEE SNAKE Manual De Operaciones

Operating Instructions

WARNING
Always wear eye protection to protect your eyes against
dirt and other foreign objects.
When inspecting drains that might contain hazardous
chemicals or bacteria, wear appropriate protective equip-
ment, such as latex gloves, goggles, face shields, and
respirators to prevent burns and infections.
Do not operate this equipment if operator or machine
is standing in water. Operating machine while in water
increases the risk of electrical shock. Rubber soled, non-
slip shoes can help prevent slipping and electric shock,
especially on wet surfaces.
Follow operating instructions to reduce the risk of injury
from electrical shock and other causes.

Starting Up the DVDPak2

Before starting up the DVDPak2 perform the following
functions:
1� Check that the unit is properly set up�
2� Connect the DVDPak2 to a SeeSnake camera
or use the provided RCA cable to connect the
DVDPak2 to an external SeeSnake monitor�
3� Place the SeeSnake camera head into the guide
hoop of the SeeSnake Reel�
4� Turn ON the DVDPak2 by pressing the Power
Button �
5� If a DVD is already in the disc tray, the DVDPak2 will
perform a disc check� If a DVD is not already in the
DVDPak2, lift the front cover over the disc tray and
press the Eject Button
a blank DVDR or DVDRW disc into the tray and
manually push the disc tray closed (See Figure 8).
6� Close the front cover to protect against dust and
moisture�
7� If an unformatted disc has been inserted into the
DVDPak2, format the disc by pressing the Return
Button when prompted� The DVDPak2 will not
record to an unformatted disc�
10 - English
2
to open the tray� Insert
Figure 8 – Disc Tray
When a formatted disc is inserted into the DVDPak2,
the view from the camera should appear on both the
DVDR screen and on the monitor of the DVDPak2 (See
Figure 9). If the camera view does not appear, change
the video display settings as specified on page 11�
Figure 9 – Camera Image on DVDR screen

Turning ON the Monitor and the DVDR

Press the Power Button
DVDPak2 monitor�
To turn on the DVDPak2 monitor independently of the
DVDR, press the Power Key
monitor independently of the DVDR will conserve battery
power since the DVDR will not be ON�

Turning OFF the Monitor and the DVDR

When ON simultaneously, press the Power Button
turn OFF both the monitor and the DVDR�
If using the monitor independently of the DVDR, press
the Power Key on the keypad
to turn on the DVDR and the
� Using the DVDPak2
to turn OFF the monitor�
to