Pre-Operation Inspection; Work Area And Equipment Set Up - RIDGID SEE SNAKE Manual De Operaciones

Table 3
DVDPak2 Keys
Icon Name
Powers the DVDPak2 monitor ON
Power Key and OFF� Does not control the
DVDR power�
Select Key Used to select menu items�
Used to navigate menus and
Arrow Keys
screens�
Menu Key Brings up monitor display options
Controls the LEDs in the camera�
Press to step up or down through
various brightness levels or
LED Brightness
Key
press once and then use the
arrow keys to step through the
brightness levels�
Sonde Key Toggles the Sonde ON or OFF�
Press the Zero Key once to reset
a temporary relative zero point
for intermediate measurement�
Relative zero will appear in
Zero Key parenthesis� Press the Zero Key
a second time to stop relative
zero and return to your actual
count� Or press and hold the
Zero Key to do a hard reset�
Toggles the microphone ON or
OFF� When ON, the LED on the
Microphone
Mute Key
Microphone Mute Key will be
gold�
Vertically flips the image on the
Image Flip Key monitor, but does not affect the
image as recorded by the DVDR�
Table 4
DVDPak2 Screen Icons
Icon Name
Indicates the charge state of the
Battery Level
Microphone Indicates that the microphone has
Off
Indicates that the Sonde has been
Sonde
Brightness Appears during the adjustment of
Control
Function
Function
battery
been muted
turned ON
the monitor brightness

Pre-Operation Inspection

WARNING
Before each use, inspect your DVDPak2 and correct any
problems to reduce the risk of serious injury from electri-
cal shock or other causes and prevent machine damage.
1� Confirm that the power is OFF, that any external
power and cords are disconnected, and that the
battery is removed� Inspect the cords, cables, and
connectors for damage or modification�
2� Clean any dirt, oil, or other contamination from the
DVDPak2 to aid in inspection and to prevent the unit
from slipping from your grip during transport or use�
3� Inspect the DVDPak2 for any broken, worn, missing,
misaligned or binding parts, or any other condition
which might prevent safe, normal operation�
4� Inspect any other equipment being used per its
instructions to make sure it is in good, usable
condition�
5� If any problems are found, do not use the unit until
the problems are corrected�

Work Area and Equipment Set Up

WARNING
Set up the DVDPak2 and work area in accordance with
these procedures to reduce the risk of injury from electri-
cal shock, fire, and other causes and to prevent damage
to the DVDPak2.
1� Check work area for the following:
Adequate lighting�
•
Flammable liquids, vapors, or dust that may ignite�
•
If present, do not work in area until sources have
been identified and corrected� The DVDPak2 is
not explosion proof� Electrical connections can
cause sparks�
• Clear, level, stable dry place for operator� Do not
use the machine while standing in water�
• If using external power, clear path to the electrical
2
English - 7