Dvdpak2 Troubleshooting - RIDGID SEE SNAKE Manual De Operaciones

Problem
Camera image not seen
Flashing battery warning
Table 8

DVDPak2 Troubleshooting

Probable Fault Location
No power to SeeSnake Reel
Connections faulty
Video display set to wrong source
Batteries low
Batteries low
2
Solution
Check power is correctly plugged in
Check the switch on the DVDPak2
Check orientation, seating, and pin condition in the
SeeSnake connection�
Set the video source as described in the Video
Display Set Up section
Recharge batteries or connect the DVDPak2 to an
external power supply�
Recharge batteries or connect the DVDPak2 to an
external power supply�
English - 15