Error Codes - KENMORE ELITE 722.1435 Serie Manual De Uso Y Cuidado

Error Codes

Problem
IE Error
OE Error
BE Error
AE Error
FE Error
HE Error
tE Error
LE Error
nE Error
Possible Cause
Water inlet problem.
Drainage problem.
Air gap or disposal is clogged.
Filters are clogged.
Oversudsing caused by improper
detergent, such as liquid dish soap
Failure to level dishwasher.
Water leakage problem.
Excessive water supplied.
Heater circuit failure.
Thermistor failure or very high inlet
water temperature (over 194 °F)
Motor trouble
Vario motor trouble
Solutions
• Check for a clogged, kinked or frozen
water inlet hose.
• Check water supply.
• Check for a clogged, kinked or frozen drain
hose.
• Clean air gap or disposal.
• Clean filters.
• Do not use hand dishwashing liquids.
Only use detergents which are designed for
use in automatic dishwashers.
• To remove detergent residue in the tub, pour
approximately 4-8 oz(100~200 mℓ) of milk
into a shallow bowl, place it in the upper
rack and then run the appliance on the
Smart Wash cycle.
• Make sure that the appliance is properly
leveled.
• Turn off the water supply to the dishwasher
and call 1-844-553-6667. (U.S.A.)
• The dishwasher makes an alert sound
for 10 seconds, and runs the drain
pumpintermittently. If power is turned off to
the machine, the machine powers back on
automatically until the AE error is resolved.
• Please call 1-844-553-6667. (U.S.A.)
31