Grill Lighting Instruction; Before Lighting - PERMASTEEL PG-40612SOLE Manual Del Usuario

GRILL LIGHTING INSTRUCTION

VERY IMPORTANT: ALWAYS INSPECT THE HOSE PRIOR TO EACH USE.

BEFORE LIGHTING:

Inspect the gas supply hose before turning the gas "ON". If there is evidence
of cuts, wear, or abrasion, it must be replaced before use. The replacement
hose assembly must be that specified by the manufacturer.
VERY IMPORTANT: READ INSTRUCTIONS BEFORE LIGHTING.
PUSH AND TURN ELECTRONIC IGNITION LIGHTING INSTRUCTIONS:
1) Open lid during lighting.
2) Turn ON gas valve on tank.
3) Push and turn any main burner control knob to "HI" and hold in. You will hear a clicking
sound from the electrodes of all burners.
4) If ignition does NOT occur in 5 seconds, turn the burner control knob OFF, wait 5 minutes,
and repeat the lighting procedure.
5) To ignite another main burner, repeat step 3.
6) To ignite the Side Burner, follow steps 2-4 using the Side Burner knob.
7) To ignite the Searing Burner, follow steps 2-4 using the Searing Burner knob.
TO LIGHT BY MATCH:
Usage:
1) Read instructions before lighting.
2) Open the lid during lighting.
3) Simply place a lighted match between the coils on the end of the lighting rod and hold next to the
burner to ignite.
4) Push and turn the burner control knob to "HI".
5) Repeat 3.4 to light other burners.
6) Keep a spray bottle of soapy water near the gas supply valve and check the connections before
each use. Do not light the grill if odor of gas is present, call our service center at (888)-287-0735.
MAIN BURNER
RIGHT SIDE BURNER
10