PERMASTEEL PG-40612SOLE Manual Del Usuario página 27

ASSEMBLY INSTRUCTIONS
37. Attach right shelf to cabinet with (7) M4 x 10
mm Screw, align the right position then tighten the
screws.
Hardware Used
M4 x 10 mm Screw
AA
38. Attach the two labeled "RIGHT" folding side shelf
support brackets C10 to the outer panel of right cabinet
with (4) M6x17 screws. Place the bracket as shown,
make sure the pre-assemble M6x12 screws are in the
lower holes of support brackets.
Hardware Used
BB
M6 x 17 mm Screw
39. Attach the foldable right side shelf to bracket C11
with (2) M6 x 12 mm Shoulder Screw. Tighten the
screws. Raise shelf and push down to lock into posi-
tion as shown. To lower shelf, lift up and fold down.
Hardware Used
CC
M6x12 mm Shoulder Screw
37
AA
x 7
38
x 4
39
x 2
27
C10
BB
C11
CC