Button Explanation; Lcd Explanation - Warm Tiles GTS-1 Instrucciones De Instalación Y Operación

BACK Button
Bouton BACK
Botón ATRÁS
GFCI TEST Button
Bouton TEST GFCI
Botón de prueba GFCI
GFCI Fault Light
Voyant de defaut GFCI
Luz de falla GFCI
GFCI RESET Button
GFCI
Bouton RESET GFCI
Botón de reinicio
(reset GFCI)
-
A. Button Explanation
B. LCD Explanation
B. LCD Explanation
Wake – The time in the morning when you want the floor to start warming up, about one hour before you wake-up.
Leave – The time when you leave for work or school, and want the floor to start cooling down to save energy.
Return – The time in the afternoon when you want the floor to start warming up to a comfortable temperature, about one hour before you return home.
Sleep – The time at night you want the floor to start cooling down to save energy.
auto – Automatic Mode. Indicates the thermostat is operating with one of the automatic temperature adjusting programs, the floor temperature is adjusted
according to programmed instructions. Either 5/2 Day, or 7 Day will also be shown on the display when in automatic mode.
5/2 Day – Indicates the thermostat is operating in the 5/2 Day program selection within the automatic mode, with separate programming for Monday through
Friday (5 day), and Saturday and Sunday (2 day).
7 Day – Indicates the thermostat is operating in the 7 Day program selection within the automatic mode.
Manual – Manual Mode. Indicates the thermostat is operating in the manual mode, temperature is maintained at all times at the selected level.
Sensor – Flashes when the Floor Sensor is malfunctioning.
Floor Temp – The floor temperature readings may be represented in either °F or °C. The operating floor temperature range is from 60°F (16°C) to 104°F (40°C).
The displayed floor temperature range is from 32°F (0°C) to 120°F (49°C). The thermostat only functions in the operating floor temperature range (from
60°F/16°C to 104°F/40°C).
Indicates that the floor heating is energized, flashes slowly during 3 minute standby cycle.
4
Screw Cover
Cache-vis
Cubiertas de tornillos
LCD Display
Affichage ACL
Pantalla LCD
UP or DOWN Button
Bouton UP ou DOWN
Botón arriba o abajo
ACCEPT Button
Bouton ACCEPT
Botón ACEPTAR
Mode Switch
Commtateur de Mode
Switch de Modo
-
Screw Cover
Cache-vis
Cubiertas de tornillos
Day
A. Button Explanation
Screw covers - Decorative covers which conceal the screws securing the thermostat,
easily removable.
LcD Display - Large scale readout which indicates the operational status of thermostat
Mode Switch – Allows easy selection of Manual, Off, or Auto (programmed) modes.
Up/Down Button - Used during programming to move values up or down (if held down
for 2 seconds, values will change rapidly).
Back Button - Used during programming to go back to the previous program step.
accept - Used during programming to accept the setting, and to advance to the next
program step.
GFCI Test Button - Used to simulate a ground fault, tests the GFCI circuitry and activates GFCI
Fault Light.
GFci Fault Light – Turns on when a ground fault is detected.
GFCI Reset Button – Resets a simulated, or repaired GFCI fault, and deactivates GFCI
Fault Light.
Minute
aM / PM
Hour