Modifying/Viewing The 5/2 Day Mode - Warm Tiles GTS-1 Instrucciones De Instalación Y Operación

3. To begin
7. Leave
H. Modifying/Viewing the 5/2 Day Mode
To access the 5/2 Day program, the thermostat must be in the 5/2 Day program mode. The program mode (either 5/2 Day or 7 Day) is shown on the display
when the Mode switch is in the Auto position. If the 5/2 Day mode is not shown on the display (7 Day shown), hold the BACK and ACCEPT buttons for 3
seconds, and use the UP (s) button to change to the 5/2 Day mode, then ACCEPT to activate this mode. The program can then be changed as follow:
1. To enter the 5/2 Day program, press and hold the ACCEPT button for 3 seconds. The common Wake settings for the Weekdays are displayed. 'Mo Tu We Th
Fr' flashes on the display and continues to flash throughout the weekday programming sequence.
2. To simply view the program settings, just press the ACCEPT button to toggle through the Wake, Leave, Return and Sleep screens for the weekdays and
weekend. The thermostat returns to normal operation after the "Weekend - Sleep" setting has been viewed. The thermostat will also return to normal
operation if no button input is received for 90 seconds.
3. To begin programming, press the UP (s) or DOWN (t) button once, the 'AM' icon flashes, press the UP (s) or DOWN (t) button to toggle between AM or
PM. Press the ACCEPT button to confirm acceptance of the AM/PM setting.
4. The 'Hour' digits flash. Press the UP (s) or DOWN (t) button to change the Wake Hour. Press the ACCEPT button once to accept the Wake Hour setting.
5. The 'Minute' digits flash. Press the UP (s) or DOWN (t) button to set the Wake Minute. Press the ACCEPT button once to accept the Wake Minute setting.
6. The 'Floor Temp' digits flash. Press the UP (s) or DOWN (t) button to set the Floor Temp. Press the ACCEPT button once to accept the Floor Temp setting.
7. The program will then advance to the Leave settings. The steps for programming the Leave, Return and Sleep settings are the same as for the Wake
settings. Repeat steps 3 - 6 for each.
8. The program will then advance to the Wake setting for the Weekend Days ('Sa Su' flush on the display). Programming for the Weekend value of the Wake,
Leave and Sleep follow the same patterns as described in steps 3 - 6 above.
9. At the completion of the 'Week – Sleep' settings, the thermostat automatically saves the entered values, and begins operating to the programmed time
and temperature settings.
During any the above steps, if no button input is received for 90 seconds or the Mode switch is moved to another position, the program will exit the 5/2 Day
setting mode, saving any of the changes that have been accepted.
J. Modifying/Viewing the 7 Day Mode
If the 7 day mode is not shown on the display (rather, 5/2 Day appears), hold the BACK and ACCEPT buttons for 3 seconds and use the UP (s) button to
change to the 7 Day mode, press ACCEPT to activate this mode. The program can then be modified or viewed as follows;
1. To enter the 7 Day mode, press and hold the ACCEPT button for 3 seconds. The Wake setting for Monday is displayed, 'Mo' flashes on the display and
continues to flash throughout the 'Mo' sequence.
2. To simply view the program settings, just press the ACCEPT button to toggle through the Wake, Leave, Return and Sleep screens for each day. The
thermostat returns to normal operation after the 'Su - Sleep' settings have been viewed. The thermostat will return to normal operation if no button input is
received for 90 seconds.
3. To begin programming, press the UP (s) or DOWN (t) button once, the 'AM' icon flashes, press the UP (s) and DOWN (t) button to toggle between AM
or PM. Press the ACCEPT button to confirm acceptance of the AM/PM setting.
4. The 'Hour' digits flash. Press the UP (s) or DOWN (t) button to set the Wake Hour. Press the ACCEPT button once to accept the Wake Hour setting.
5. The 'Minute' digits flash. Press the UP (s) or DOWN (t) button to set the Wake Minute. Press the ACCEPT button once to accept the Wake Minute.
6. The 'Floor Temp' digits flash. Press the UP (s) or DOWN (t) button to set the Floor Temp. Press the ACCEPT button once to accept the Floor Temp setting.
7. The program will then advance to the Leave settings. The steps for programming the Leave, Return and Sleep settings are the same as for the Wake
settings. Repeat steps 3 – 6 above.
8. The program will then advance to 'Tu' and cycle through the Wake, Leave, Return and Sleep settings, continuing through the week sequentially until 'Su'
settings are completed.
During the above steps, if no button input is received for 90 seconds or the Mode switch is moved to another position, the program will exit the 7 Day setting
mode, saving any of the changes that have been accepted.
9. At the completion of the 'Su – sleep' settings, the thermostat automatically saves the entered values, and begins operating to the programmed time and
temperature settings.
During programming or viewing, use the BACK button to return to the previous program step. The program will automatically exit and return to normal
operation if the BACK button is pressed at the Wake screen. Any program settings on that day, or sequence of days, will be lost.
6
4. Hour
9. Completion
6. Floor Temp
GFci Test