Tyco DSC PowerSeries Neo HSM2HOST Guia De Instalacion página 10

Two test results are provided:
• 24-hour: Average results of signal strength testing over a 24-hour period.
• Now: Signal status results of the current test.
During testing, the Ready and Armed LED's flash to indicate data is being received. A flashing Trouble
LED indicates RF interference. The following status indicators may be displayed:
Table 1: Wireless Device Status Indications
LCD Icon*
Strong 1 9
Good 2 10
Poor 3 11
1-Way 4 12
Not Test 5 13
None 14
*For Icon keypads, digit 1 indicates 24-hour test results; digit 2 indicates Now test results.
+For LED keypads, the first digit indicates 24-hour results; the second digit indicates Now test results.
LED+
Strong signal strength
Good signal strength
Poor signal strength
The device is operating in 1-way mode only.
The alarm panel cannot configure or control the
device
Displayed as the Now result if no test was
performed.
Always displayed as the 24-hour result when
testing wireless keys.
Status
9
Repeater [905]
Repeater 1
Repeater 2
Repeater 3
Repeater 4
Repeater 5
Repeater 6