Tyco DSC PowerSeries Neo HSM2HOST Guia De Instalacion página 9

Ocultar thumbs Ver también para DSC PowerSeries Neo HSM2HOST:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

[804][901]-[905] Delete Wireless Devices
To delete wireless devices:
1. Enter Installer Programming section [804] then select one of the following sub-sections:
• 901 – Delete wireless zone devices
• 902 – Delete wireless key
• 903 –Delete sirens
• 904 - Delete repeater
• 905 - Delete keypad
2. Select a device to delete using the scroll keys or go directly to a specific device by entering a hotkey.
3. Press [*] to delete or [#] to exit.
[804][921]-[925] Replace Wireless Devices
To replace a wireless device:
1. Enter Installer Programming section [804] then select one of the following sub-sections:
• 921 – Replace wireless zone devices
• 922 – Replace wireless keys
• 923 – Replace sirens
• 924 – Replace repeater
• 925 – Replace keypad
2. Press [*] to select a sub-section. The first available device is displayed.
3. Select a device to replace using the scroll keys or go to a specific device by entering a hotkey.
4. Press [*]. When prompted, activate the device (full enrollment) or enter the device ID (pre-
enrollment). A message is displayed confirming enrollment.
[804][990][001 – 005] Show All Devices
Use this section to review wireless devices enrolled on the system and to view serial numbers
associated with each device.
To review wireless device information:
1. Enter Installer Programming section [804][990] then select one of the following sub-sections:
[001] – all zones
[002] – repeaters
[003] – sirens
[004] – wireless keys
[005] – keypads
2. Press [*] to select a wireless device type. The first available device is displayed.
3. Use the scroll keys to view the enrolled devices.
NOTE: This option is not fully supported by LED and ICON keypads.
[804][999] Reset to Factory Defaults
Selecting this option resets HSM2HOST programming to factory default settings.
[904] Placement Testing Wireless Devices
The following test modes are available:
• 001-128 – Test wireless zones
• 520 – Test all repeaters
• 550 – Test all sirens
• 600 – Test all wireless keys
• 700 – Test all keypads
8

Publicidad

Tabla de contenido
loading

Tabla de contenido