THOMSON MIC500IWF Manual Del Usuario página 28

Here you may set the time and date.
The factory setting for this radio is "automatic time". When the radio is connected to the Internet via a
network, the time and date will automatically be synchronised. In this case it is not necessary to set
the time.
6.1.5. Alarm
The radio can be used as a radio alarm.
This menu item allows you to set two wake-up times, if desired. Also, you can choose whether the
alarm will go off at the set time with an alarm sound, a melody, an Internet radio station, a DAB+ radio
station or an FM station.
When you have entered the alarm time, activate the radio alarm function in the menu.
To stop the alarm, press the "Enter key" on the remote control, or key 7 on the radio.
To do this, go to "Settings" and select the "Mode" menu item, and switch the operating mode to "radio
alarm".
6.1.6. Timer
The timer function provides another way to set an alarm. Set the timer duration; the alarm will sound
once the duration has elapsed.
To do this, use the keys to enter the time in minutes and seconds. Pressing the key repeatedly will
increase or decrease the time in one-second intervals. Hold the or key down for longer to scan
forward or backward through time.
Confirm your entry by pressing "Enter".
6.1.7. Language
Here you can set the radio's menu language.
- EN 8 -