Imaging Modes; Cleaning And Disinfecting - FujiFilm SonoSite P11 Serie Guia Del Usuario

Imaging modes

Table 1-1 includes the imaging modes and exam types available with the P11x transducer.
Table 1-1: Available exam types and imaging modes
Exam type
Arterial
Venous
a. The optimization settings for 2D are Res, Gen, and Pen.
b. The optimization settings for CPD and Color are low, medium, and high (flow sensitivity) with a range of PRF
settings for Color depending on the setting selected.
Note A special training mode is available for use with Blue Phantom models. See
up training mode"

Cleaning and disinfecting

The P11x transducer must be cleaned and disinfected before each exam. In addition to protecting the patients
and employees from disease transmission, the disinfectant you choose must be safe for the transducer.
Caution Exposing the P11x transducer to non-recommended chemical sterilants or
submersion of the transducer beyond recommended levels may result in
transducer degradation over time, leading to poor image quality or transducer
failure. See Disinfectants for SonoSite Products.
Please follow the cleaning and disinfection instructions available at www.sonosite.com.
Imaging modes
a
2D
b
CPD
M Mode
on page 7.
Imaging mode
PW
b
Color
Doppler
CW
Doppler
"To set
3