Disposal And Environmental Protection - Tractel guard trac Manual De Instalación, De Utilización Y De Mantenimiento
Ocultar thumbs
Ver también para guard trac:
- Manual de instalación, de operación y de mantenimiento (152 páginas)
Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12. Disposal and environmental protection
The scrapping of the guard trac™ or guard trac™ plus guardrail must be carried out in accordance with
the legislation of the country.
The guard trac™ or guard trac™ plus guardrail must be treated as shown in the table below:
Component or Subset:
Counterweight support single or double equipped
Single or double bracket
Clamping cone
Cone spring
Anti-slip pad
Latch
Barrier
Adjustable barrier
Barrier components
Pin
Adjustable gate
Structure
Small components
Counterweights
Counterweight Interface
Inter-barrier link
13. Markings
Seven markings are present on guard trac™ and
guard trac™ plus guardrails:
1.
The marking of single and double bracket
2.
The marking of the latch, the cone and the
anti-slip pad
3.
Marking of barriers, adjustable barriers
and adjustable gate
4.
The marking of the counterweight.
5.
The
marking
interface
6.
The marking of the inter-barrier link
7.
The
identification
installation
13.1. Marking of the single or
double bracket
The markings of the supports (Fig. 23) indicate:
rep 1:
a pictogram indicating that the manual
must be read before installation and
use,
rep.3:
the product description: guard trac™
of
the
counterweight
marking
of
the
To treat as waste of the type:
Cast iron
Plastic
Stainless steel
EPDM
Stainless steel
Aluminium
Aluminium
Steel
Aluminium
Plastic and stainless steel
Loaded and reinforced concrete
Aluminium
Steel
rep.4:
AA: last two digits of the year of
manufacture / MM: month of
manufacture
rep.5:
manufacturing logo of the part
rep.6:
the trademark: Tractel®,
rep.7: Tractel® reference of the support
equipped with anti-slip pad, cone and
cone spring. The reference of the fully
equipped double bracket is 217447,
and that of the single bracket is
217437
rep.8:
the reference standards: EN13374-A
and ISO14122-3
13.2. Marking of latch, cone and
non-skid pad
The marking is as follows:
a:
trademark: Tractel®,
f:
the manufacturing date
GB
19
Publicidad
Tabla de contenido
