Brandt DFH12127W Instrucciones De Uso página 23

WARNING!
Insert the drain hose into a drain pipe with a minimum di ameter of 4cm, or let it run into the sink, making sure to
avoid bending or crimping it. Use the spec al plastic support that comes with the appliance . The top of the hose
must be at a height between 40 and 100cm. The free end of the hose must not be immersed in water to avoid the
back flow of it.
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B, C
Close the drain hose hook to the counter
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the
risk of the water inlet to be blocked and damage the appliance.
Please close the hydrant after using.
i
Front
Drain pipe
A
B
C
18
Drain hose hook
Counter
φ 40mm