EN
34
Cleaning of the handle position and remote control storage area
Take the remote control out of the storage area in the direction shown by the arrow.
Clean the handle position and remote control storage area of this unit with wringed wet
soft cloth. Do not drip water into the unit. If the remote control needs to be put back into
the remote control storage area, put it back into the storage area in the reverse direction
of removal.
Moving and storing equipment
To handle or move the unit, hold the top of the air outlet of the front shell with one hand
and the handle position at the top of the back shell with another hand, and leave the unit
in upright position.
Note: Do not hold the horizontal louvre by hand. Leave the unit in the upright position
when handling or moving it. If the remote control is in the position of the handle, take
out the remote control.