Velleman VM133 Manual Del Usuario página 6

Use
It is possible to select different turn-off timers. Select the timer setting suited for your application.
This can be done be means of the 2 pole small DIP switch. ON is downwards.
• Now close the enclosure (check the position of the red LED).
• Fix the module by means of a screw on the ceiling or wall
USE
Switch on the light like you did before.
The LED on the module should blink, indicating the timer is running
Check that after your preset time the light or appliance turns off, the LED should now remain on.
To restart the timer:
• Turn off the switch and wait a few seconds
• Turn on the switch again.
6
Off - Off = 1h
Off - On = 2h
CAUTION: The module must always be closed and fixed during use.
On - Off = 4h
On - On = 8h