Brinkmann 810-6680-S Manual Del Propietário página 26

Step 6
Align tank holder brace to tank
needle assembly using hinge and
cotter pin as illustrated.
Step 7
Lock the casters. Align key holes
in bottom of side cart panels with
corresponding pre-installed bolts.
Insert key holes over bolts and
slide toward back of base. Secure
using two M6 X 12 mm bolts
(black) as illustrated. Tighten down
all bolts.
Step 8
Use eight pre-installed
M6 X 12 mm bolts (black) to
attach the cart corner brackets to
the cart base and the cart side
panels. Tighten bolts to secure.
Step 9
Attach the upper cart brace using
four M6 X 12 mm bolts (black).
25
Right Side Left Side
Cart Panel Cart Panel
Cart Corner
Bracket