Temperature Control; Leveling Instructions; Interior Light - Danby DPF074B2WDB-6 Manual Del Propietário

Refrigerador libre de escarcha parcial
Ocultar thumbs Ver también para DPF074B2WDB-6:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

TEMPERATURE CONTROL

The refrigerator control panel is located on the side
of the refrigerator compartment.
• Lower numbers indicate warmer temperature
settings.
• Higher numbers indicate colder temperature
settings.
• When set to 0, the compressor will turn off.
• When set to 7, the compressor will run
continuously.
• The recommended setting for regular daily use
is 4.
• If the ambient temperature is higher than 38°C
(100°F) the recommended setting is 2 - 4.
• If the ambient temperature is lower than 16°C
(60°F) the recommended setting is 4 - 6.

INTERIOR LIGHT

Any replacement or maintenance of the interior
incandescent light should be performed by the
manufacturer, its service agent or a similar qualifi ed
person.
SHELVES
The walls of the refrigerator cabinet are equipped
with a series of runners so that the shelves can be
positioned as desired.
There are no locks or catch mechanisms, remove a
shelf by pulling it all the way out and replace it on
the desired runners.
The refrigerator door is equipped with two shelves
that can be adjusted for height. To remove a
door shelf, gently push upwards but the bottom.
Reposition as required and push downward to lock
into place.

LEVELING INSTRUCTIONS

There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the cabinet.
2. Slowly turn the leveling leg clockwise until the
appliance is level.
4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dpf074b2bsldb-6

Tabla de contenido