Setting Access Control; Enable/Disable Access Control - Oki MC360 Guia De Instalacion

1. In the top level screen, scroll down to Menu and select using the Enter key.
2. In the drop down menu, scroll down to the Admin Menu and select using the
Enter key. Enter the password.
3. In the drop down menu, scroll down to Fax Setup and select using the Enter
key.
4. In the drop down menu, scroll down to Basic Setup and select using the Enter
key.
5. In the drop down menu, scroll down to the Ring Response and select using the
Enter key.
6. In the drop down menu, scroll down to the response time required and select
using the Enter key.
7. Using the Left arrow key, return to the top level menu.

Setting Access Control

The operation and functionality of this machine can be limited only to authorized
personnel by the simple introduction of a 4-9 digit PIN (Personal Identification
Number). This is known as Access Control. The greater the number of digits in the
PIN, the more secure it is.

Enable/Disable Access Control

To enable Access Control, use the menu to go to: Menu >Admin Setup>System
Setup>Access Control and select Enable.
• With Access Control set to Enable, the display reverts to the System Setup
screen immediately following the setting change. If one of the functions such as
Print, Fax Send or PC Scan is running however, the display will only revert to
the System Setup screen when the task has been completed.
11 English