Setting The Local Phone Number; Setting The Fax Sender Id; Setting The Ring Response - Oki MC360 Guia De Instalacion

4. Enter the admin. password using the Ten Key Pad. Press Done to complete.
5. Using the Down arrow key scroll to Fax Setup. Press Enter.
6. Using the Down arrow key scroll to Basic Setup. Press Enter.
7. Using the Down arrow key scroll to Country Code. Press Enter.
8. Select the Country in which the MFP is situated. Press Enter.
9. Use Left arrow key to return to Function screen.

Setting the Local Phone Number

1. From the Function screen select Menu.
2. Using the Down arrow key scroll to Admin Setup.
3. Press Enter. (At this point you will need the Administrator's password.)
4. Enter the Admin password using the Ten Key Pad. Press Done to complete.
5. Using the Down arrow key, scroll to Fax Setup. Press Enter.
6. Using the Down arrow key, scroll to Basic Setup. Press Enter.
7. At Local Phone No., press Enter.
8. Enter your Local Phone number using the Ten Key Pad. Press Done to complete.
9. Use Left arrow key to return to Function screen.

Setting the Fax Sender ID

1. From the Function screen select Menu.
2. Using the Down arrow key scroll to Admin Setup.
3. Press Enter. (At this point you need the Administrators' password.)
4. Enter the admin. password using the Ten Key Pad. Press Done to complete.
5. Using the Down arrow key scroll to Fax Setup. Press Enter.
6. Using the Down arrow key scroll to Basic Setup. Press Enter.
7. Using the Down arrow key scroll to Sender ID. Press Enter.
8. Enter your Sender ID (as required) using the Ten Key Pad. Press Done to
complete.
9. Use Left arrow key to return to Function screen.

Setting the Ring Response

The fax facility of this MFP will automatically answer the incoming ringtone after the
delay period set by the ring response.
The factory default for ring response is 1 ring. This can be set up to 20 seconds in the
Admin Menu as follows (you need to have administrator rights to alter this setting):
10 English