c) User interfaces
The watch has 3 central hands (hours H, minutes M and seconds SEC) as well as
2 digital displays: upper screen at 12 o'clock (consisting of 7 alphanumeric digits
) and lower screen at 6 o'clock (6 digits
███████
The different functions are selected by turning the crown.
The latter shows two stable axial positions :
– neutral 1 (to change functions)
– pulled out 2 (for settings)
– as well as an unstable position 0
(which acts as a pushpiece,
notably to light up the digital displays).
The crown can be turned forwards (clockwise) or backwards (anti-clockwise).
If one forgets the winding stem in the pulled out position, the upper screen will
display
PUSH CROWN
A short press (0) on the crown will light up the two digital displays. If the TILT
function has been activated (see chapter 7.b), the light will automatically switch
on depending on the position of the wrist.
The watch has two pushpieces (P1 at 2 o'clock and P2 at 4 o'clock), whose action
is connected to the function selected. Depending on the desired action, the user
at regular intervals, while a beep will sound every 30 seconds.
:
:
).
88
88
88
10