Breitling COCKPIT B50 Manual Del Usuario página 48

During the last 3 minutes, the seconds hand counts the seconds and a beep is
emitted every second for the final 10 seconds. At 0, an alarm sounds for 20 seconds,
with a 10-second reminder after 1 minute. The upper screen flashes . The
ž
TMR 0
alarm can be stopped by pressing one of the two pushpieces or on the crown.
16. SECOND TIMEZONE ( )
TIME 2
In addition to the UTC time (the base time of the watch) and the first (main) TIME
zone, a second timezone TIME 2 is available.
a) Setting ( )
SET T2
The setting takes place in exactly the same way as the main TIME zone (see chapter
7), according to the difference with the UTC time and in 15-minute increments
between and .
UTC-12 UTC+14
N.B.: in the mode setting, pressing P1 starts the seconds counter from 0.
SET T2
The seconds counter stops only when the second is manually modified. In this case,
it starts again as soon as the adjustment setting is exited (when the crown is put
back to neutral position 1. The seconds are automatically synchronized on the UTC
and TIME zones.
A long press on P2 provides the option of choosing between the 12-hour (
T2 AM
or ) and 24-hour ( ) display functions. The change also takes place
T2 PM TIME 2
automatically for the TIME zone and the two alarms.
47