Breitling COCKPIT B50 Manual Del Usuario página 26

6.
ALARM SIGNAL
7. : audible confirmations connected to pushpieces, with or without hourly
TONE
time signal or signal for full timekeeping hours.
8. : option of disabling the following functions:
MODE
9. : choosing the user interface language.
LANGUAGE
Please note that as soon as the
position 2, the hour and minute hands "park" in order to facilitate the readability
of the two screens.
a)
SyNCHRO
The time shown on the analog display (hands) and that shown on the digital
display (screens) must be perfectly synchronized. In the event of the two displays
being completely out of synchronization (following a shock or accidental stop), the
analog display on the digital indicator is adjusted as follows:
• Select the
SETTING
• Pull the crown into position 2 (the hour and minute hands will "park")
• Select
SyNCHRO
• Press P1 to activate the setting: the hands will align themselves on the digital
display on the lower screen.
: choosing the type of alarm – buzzer, vibrating or both.
SETTING
function by turning the crown
by turning the crown
CHRFLGT
mode is activated by pulling the crown into
25
, and
CDCUCLK ALCU
.