Alpine TUE-T012 Manual De Operación página 16

1
BRIGHT
2
Screen display/Affichage d'écran/
Display dello schermo
-
Button
Touche
-
Tasto
16
MODE
COLOR TINT
BRIGHT
+
BRIGHT
Button
Touche
+
COLOR
Tasto
TINT
Basic Operation
Adjusting the Screen
Brightness, color density and tint of the screen
can be adjusted. Make these adjustments with
the color control SW set to "ON".
Press the MODE button.
The mode will be changed each time the button
is pressed and displayed on the screen.
Adjust by pressing the BRIGHT button ( / )
while the mode is being displayed.
Notes:
• The BRIGHT adjustment can be made by
directly pressing the BRIGHT button
( / ) without performing the step 1 .
• When the color control SW is changed from
"OFF" to "ON", make the TINT adjustment
again.
• When the RGB connection is made in the
Navigation mode, only the BRIGHT
adjustment can be made.
• The TINT adjustment can be made in the
Navigation mode when a NTSC system
navigation is connected to the RCA jacks.
English