Lenze L-force Communication EthernetCAN EMF2180IB Instructions De Montage página 62

8 Diagnostics
LED status displays
LED
Pos. Colour / status
1 2
off
+
green
red
red
blinking fast (jittering)
blinking (green) every 0.2 s
blinking (green) every 0.2 s
blinking (red) 1 x, 1 s off
blinking (green) every 0.2 s
blinking (red) 2 x, 1 s off
on (green)
on (green)
blinking (red) 1 x, 1 s off
on (green)
blinking red 2 x, 1 s off
on (green)
3 x blinking red, 1 s off
blinking (green) once per
second
blinking (green) once per
second
blinking (red) 1 x, 1 s off
blinking (green) once per
second
blinking red 2 x, 1 s off
62
Description
Connection to master not established.
Z
CANopen status (" ")
F
CANopen error (" ")
Z
: Bus off
Automatic baud rate recognition is active.
Z F
: Pre−Operational, : None
Z F
: Pre−Operational, : Warning limit reached
Z F
: Pre−Operational, : Node guard event
Z F
: Operational, : None
Z F
: Operational, : Warning limit reached
Z F
: Operational, : Node guard event
Z F
: Operational, : Sync message error
Z F
: Stopped, : None
Z F
: Stopped, : Warning limit reached
Z F
: Stopped, : Node guard event
l
EDKMF2180 DE/EN/FR/ES/IT 4.0