Panasonic KX-NT321 Guía De Referencia Rápida página 12

NT321NE_GQ.book Page 12 Thursday, September 11, 2008 6:57 PM
Connection
Connection
<Back view>
Headset
Recommended: KX-TCA89
PC connection/Switching Hub connection
• Use a straight CAT 5 (or higher) Ethernet cable (not included) that is
6.5 mm in diameter or less.
• For further information on the connection to a PC, refer to the
documentation provided for the PBX.
AC adaptor
• Use a Panasonic AC adaptor KX-A239CE (PQLV206CE).
• The AC adaptor is used as the main disconnect device. Ensure that
the AC outlet is located near the unit and is easily accessible.
CAUTION:
When selecting Ethernet cables
• Use flexible, high-quality, snagless (without strain relief)
cables. Do not use cables with coating that may tear or crack
when bent.
• Ensure that the Ethernet cables and the AC adaptor cord are
When connecting cables
• Cables may be routed upwards by using the appropriate
clamped to prevent damage to the connectors.
cable clamp located on the back of the unit.
• Ensure that the headset cord and the AC adaptor cord are
When connecting a headset and AC adaptor
wound around the hook to prevent damage to the connectors.
12
To a Switching Hub.
To a PC.
Optional AC adaptor
(not included).
Clamp
AC adaptor