Parts; Getting To Know Your Ninja® Foodi® 2-Basket Air Fryer; Operating Buttons; Before First Use - Ninja DZ400 Serie Guia Del Usuario

PARTS

Air Outlet
(located on back) Main Unit
Nonstick
Crisper Plates
(one for each basket)
4 ninjakitchen.com
Air Intake Vent
Control Panel
Nonstick Baskets
(one for each zone)
GETTING TO KNOW YOUR NINJA® FOODI®
XL 2-BASKET AIR FRYER
When setting time, the digital display shows HH:MM.
FUNCTIONS
AIR FRY: Use this function to give your food
crispiness and crunch with little to no oil.
BAKE: Create decadent baked treats
and desserts.
ROAST: Roast meats to tenderize and
more.
AIR BROIL: Add the crispy finishing touch
to meals, or melt toppings to create the
perfect finish.
REHEAT: Warm your leftovers, with
a crispy result.
DEHYDRATE: Dehydrate meats, fruits, and
vegetables for healthy snacks.

OPERATING BUTTONS

Controls the output for the basket
1
on the left.
Controls the output for the basket
2
on the right.
TEMP arrows: Use the up and down arrows
to adjust the cook temperature before or
during cooking.
TIME arrows: Use the up and down arrows
to adjust the cook time in any function
before or during the cook cycle.

BEFORE FIRST USE

1 Remove and discard any packaging material, promotional labels, and tape from the unit.
2 Remove all accessories from the package and read this manual carefully. Please pay
particular attention to operational instructions, warnings, and important safeguards
to avoid any injury or property damage.
3 Wash the baskets and crisper plates in hot, soapy water, then rinse and dry thoroughly.
The crisper plates and baskets are the ONLY dishwasher-safe parts. NEVER clean the
main unit in the dishwasher.
SMART FINISH button: Automatically
syncs the cook times to ensure both zones
finish at the same time, even if there are
different cook times.
MATCH COOK button: Automatically
matches Zone 2 settings to those of Zone 1
to cook a larger amount of the same food,
or cook different foods using the same
function, temperature, and time.
DIAL: Turn the dial from side to side to
select desired cook function. Press center
of dial to start or pause cooking.
POWER BUTTON: The button turns
the unit on and off and stops all
cooking functions.
Standby Mode: After 10 minutes of no
interaction with the control panel, the unit
will enter standby mode. The Power button
will be dimly lit.
Hold Mode: Hold will appear on the unit
while in SMART FINISH mode. One zone
will be cooking, while the other zone will
be holding until the times sync together.
NOTE: Not all models include all functions.
ninjakitchen.com 5