Operator Position; Protective Clothing; General Warnings Before Use; General Warnings While Using The Machine - Ghibli 5 Serie Uso Y Mantenimiento

Electrical/mechanical maintenance tech-
nician
A technician qualified to operate on the ma-
chine in order to repair or replace parts which
require the removal of the protective cover.
1.2.b - Operator position
When using the machine, the operator is
seated in the operator's seat with his/her
hands on the handlebars.
1.2.c - Protective clothing
- Use protective clothing as indicated in the
standards in force in the country in which
the machine is used.
1.2.d - General warnings before use
- Before using the machine, check that the
fixed safety guards (covers) are always
correctly secured in position.
1.2.e - General warnings while using
the machine
- If the machine makes strange noises, stop
it immediately and identify the cause.
- DO NOT leave the machine unattended
on inclined surfaces of grades above
16%.
- The machine has a gradeability load of
16%.
- It is absolutely forbidden to turn while on
ramps; danger of tipping/overturning.
- While using the machine, do not knock
into shelving or cupboards.
- Avoid using the machine in environments
where there is a risk of falling objects.
- It is forbidden to use the machine out-
doors or on public roads.
- If possible, use the machine in environ-
ments where no persons are present;
in the present of unauthorised persons,
warn them to move away before using
the machine.
- Do not use the machine in environments
with the presence of corrosive or salty
substances.
- Do not use the machine in explosive en-
vironments (ATEX).
1.2.f - General warnings about the
batteries
- The battery's acid is corrosive: in the
event of skin contact, rinse abundantly
with water.
- Use appropriate personal protection
equipment to avoid contact with the skin
(see standards in force in the country in
which the machine is used).
- Do not inhale the vapour: it is danger-
ous.
- As mixtures of explosive gasses may
form during battery charging, the battery
charging environment must be well-ven-
tilated and must comply with the current
relative standards.
- It is forbidden to smoke and/or use na-
ked flames within 2 metres of the battery
during charging, in the charging area and
while the battery is cooling after charg-
ing.
- Report any liquid leaking from the bat-
tery:
leaks are dangerous and highly pollut-
ing.
1.2.g - General warnings during main-
tenance
- Disconnect the batteries/electric cable
before performing maintenance and re-
pair operations.
- Do not rest tools and metal objects on the
batteries; danger of short circuits.
- Do not use aggressive detergents, acid,
lye etc. during cleaning and washing and
take particular care with electrical parts.
- Do not wash the machine with direct or
pressurised jets of water.
- When the machine must be lifted for any
maintenance operations, it is necessary
to work safely by placing fixed supports
underneath it.
- Contact an authorised support centre
for repairs and request ORIGINAL spare
parts only.
EN - 7
EN