Filling The Tank - Ghibli 5 Serie Uso Y Mantenimiento

8.1 - FILLING THE TANK

(Fig. 17)
WARNING:
Only add clean mains water to the tank at
a temperature no greater than 50°C.
- Check that the hose (1) is properly con-
nected to the tank by means of the ap-
propriate joints.
- Open the clean water tank (3) cap (2).
- Pour water into the tank (3) until it is full.
- Pour some liquid detergent into the tank
according to the quantity of water in the
tank.
NOTE:
Use non-foamy detergents only. For the
quantities, follow the instructions provided by
the detergent manufacturer according to the
type of dirt.
DANGER:
- In the event of eye or skin contact with
the detergent, or ingestion of the de-
tergent, see the detergent manufac-
turer's usage and safety data sheet.
- Close the cap (2) when the filling proce-
dure is completed.
3
3
EN - 21
EN
2
1
Fig. 17