Cleaning The Recovery Water Tank - Ghibli 5 Serie Uso Y Mantenimiento

EN
11.1.b - Cleaning the recovery water
tank (Figs. 25-26)
WARNING:
At the end of the washing operations, it
is compulsory to clean the recovery wa-
ter tank to prevent deposits or scaling
and the proliferation of bacteria, odours
or mould.
DANGER:
Drain the recovery water tank (2) before
lifting it.
- Remove the cover (1).
- Lift the recovery water tank (2).
- Leaving the hose (3) lowered and the cap
off, add water through the upper opening
(4), cleaning the inside of the tank until
clean water comes out of the drain hose.
- Clean the level sensors (5) with a damp
cloth, taking care not to damage them.
- Reassemble all of the parts by performing
these operations in the opposite order.
- Unscrew the Allen screw (6) and remove
the filter cover (7).
- Remove and clean the suction filter (8),
removing any pieces of paper, wood, etc.,
which may be obstructing it.
5
6
Fig. 26
Fig. 25
EN - 28
8
1
7
4
2
3