Specific Safety Rules; Functional Description - Milwaukee 6515-20 Manual Del Operador

1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring.
Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Keep hands away from all cutting edges and moving parts.
3. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
4. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
7
1. Handle
2. Trigger
3. Trigger lock switch
4. Nameplate
5. Insulating boot
6. Quik-Lok™ blade clamp
7. Blade
8. Adjustable pivot shoe
9. Shoe clamp screw
10. Battery pack
11. Battery pack release buttons

SPECIFIC SAFETY RULES

Volts Direct Current
No Load Strokes per Minute
(SPM)
Properly Recycle Nickel Cadmium
Batteries
Underwriters Laboratories, Inc.

FUNCTIONAL DESCRIPTION

6
8
Catalog
No.
6515-20
5
4
9
10
Specifications
Length of Strokes
Volts Stroke per Minute
18 DC 0 - 2700
1"
3
2
11
1
page 3