Zone Control Panel Function And Installation - L.B.White I-40 Manual De Usuario

Zone Control Panel
Component Function and Installation
The zone control panel is a remote mounted control system
allowing the operation of a specifi c amount of heaters
within a certain zone of the building. The panels are of high
and medium capacities.
These panels will control the following quantity of heaters
depending on fuel type.
Zone Control Panel Capacities
Model and
Heat Output
I-40 Butane /
(40,000 BTUH) propane
The zone control panel must be mounted to a fl at, stable
wall inside the building. Use lag screws provided.
Care must be taken to ensure that the ther-
mostatic control is not exposed to outside
air temperatures. Exposure of the thermo-
static control to outside air temperatures
(Example: when sidewall curtains are open)
may cause the heater to provide unwanted
heat.
The zone planel must have an adjustable high pressure
regulator installed upstream of the inlet of the zone control
panel. This regulator may be purchased from the L. B.
White Co. as an optional accessory. The regulator must be
capable of handling a maximum inlet pressure of 10 psi,
while supplying an outlet pressure of 5 psi nominal. This
pressure is supplied to the zone control or individual con-
trolled heater. For natural gas, a regulator must be installed
to supply an outlet pressure of 5 psi nominal.
Consult your local L. B. White dealer or distributor or call
the L. B. White Co. for recommendations on the best con-
fi guration of zone panels for your specifi c application.
Fuel High Capacity Panel
Quantity
20
I-40 Manual and Spark Ignition
Owner's Manual • I-40
13