Master audio KEY12A Manual Usuario página 13

Master Audio
Mounting:
1- Hold the bracket against the mounting surface, so you can mark the locations of
the mounting holes
2- Drill corresponding pilot holes on the wall and attach the bracket with screws
3- Remove the top hat socket from the cabinet and put the M8 round plate
4- Set the cabinet on the bracket and fix it through the two M8 bracket knobs
5- Adjust the cabinet for desired position and angle
For more information refer to "SP-XX" user's manual.
3.7.2. KEY12A and KEY15A flying with ACR-M8 eyebolts
These models provide
several M8 flying points.
Their correct use will permit
the flying in horizontal or
vertical position.
Fig.9. KEY12A rigging
points
Fig.10. KEY15A rigging points
KEY Series (Active). Version 1.0 Feb14 13