Master audio KEY12A Manual Usuario página 14

Master Audio
Horizontal flying
Vertical Flying
We offer as optional accessory the ACR M8 eyebolt.
3.7.3. KEY12A and KEY15A flying with SP35 wall stand
These models may be wall mounted by the SP35 wall stand accessory.
Fig.11. SP35 wall stand
Mounting:
1- Hold the wall stand against the mounting surface, so you can mark the locations of
the mounting holes
2- Drill corresponding pilot holes on the wall and attach the bracket with screws
3- Set the cabinet on the 35mm pole
4- Adjust the cabinet for desired angle
3.7.4. KEY12A and KEY15A vertical flying with "HR" bar
Use HR1215 flying bar for
KEY12A and KEY15A
Fig.12. "HR" flying bar for KEY cabinets
KEY Series (Active). Version 1.0
KEY12A
2&5 or 3&6 or 9&10 or 11&12 (front rigging points)
1&4 or 7&8 (back tilt points)
2&3 or 5&6 or 9&11 or 10&12 (front rigging points)
1 or 4 or 7 or 8 (back tilt points)
KEY15A
Feb14 14