Selecting A Preset - Master audio KEY12A Manual Usuario

Master Audio

4.2 Selecting a Preset

To change the Preset, follow these steps:
1) If the keypad is locked, unlock it with
FLAT
MENU + SELECT
2) Press PRESET once. You will enter the
Preset menu, and the current preset will be
shown
3) Press PRESET to browse through the available presets of the system. When you
find the desired one, press SELECT to set it as the current preset. You will be
redirected to the main screen
4.3 Gain setting
Gain
In order to change the gain, first unlock the
keypad with MUTE + SELECT and then
press UP or DOWN. Then you will enter the
gain setting screen.
-9.5dB
The Gain can be adjusted between 0dB and -
20dB. When -20dB level is reached, and the DOWN key is further pressed, the
system will mute and this will be shown in the screen. To unmute the system, press
the UP key at least once.
To accept the gain setting and go back to the main screen, press SELECT. Should
this not happen after 30 seconds, the system will automatically switch to the main
screen.
4.4 Browsing the menus
To browse the menus, the MENU and SELECT keys are used. Always remember to
unlock the keypad to perform an action.
MENU browses the different options on each level. To accept an option, press
SELECT. To enter the main menu, press MENU once. The following options are
available:
Audio Settings Info
Configuration Back
Press SELECT to enter to the submenus.
AUDIO SETTINGS MENU
Using the MENU key, the following options can be browsed. Press SELECT to enter
each of them.
KEY Series (Active). Version 1.0 Feb14 16