ARENDO 303001 Manual Del Usario página 20

5 Usage
Open the cover of the water kettle. Then fill the kettle with cold water and close
the cover.
Note: For the maximum filling level, a filling mark (0,5l) is located on the inner
side. Please make sure not to fill in more than the maximum level as marked on
the scale. If the kettle is over-filled, boiling water can be ejected. Put the kettle on
the base plate. On the top of the handle, there is a control panel for the selection
of different water temperatures. Press it repeatedly in order to select your desired
temperature. Then press the "ON/OFF" button to start the heating process. The
current temperature is shown on the control panel and also on the status LED in
colour (also see under point 2 „technical data" > colours of the status LEDs). The
actuation of the keys is confirmed by a short audible signal. As soon as the target
temperature is reached, a beep will sound and the temperature levels (LED) and
also the status LED will turn off. The heating element switches off automatically.
The procedure has been completed. Now the case can be lifted and the water can
be used. If you wish to abort the cooking process, just press the "ON/OFF" button
at any time.
5.1 Warm-keeping function
The "KEEP WARM" function allows you to maintain a specific temperature (50°C/
70°C/ 80°C and 90°C). It is suitable to keep warm boiled water over a longer period
of time. To do this, press and hold the „Temperature control" button, until the tem-
perature LED flashes and the status LED lights up in the corresponding colour. The
kettle activates the keep warm function for one hour. Make sure you have set your
desired temperature before.
20
English