Removing The Crisper Support Box; Assembling The Crisper Support Box - LG Signature LUPXS3186N Manual Del Propietário

40 HOW TO USE

Removing the Crisper Support Box

1
Fully open the fridge door and pull out all
the shelves.
CAUTION
To avoid injury, always empty the shelves
y
and crisper drawers before removing
them.
2
Lift the front of the crisper cover until you
hear a loud click.
3
Tilt the cover slightly and support it with
one hand while pulling it out.
4
Open the convertible pantry and lift the
front side of the crisper support box with
both hands.
5
Slide one hand under the crisper support
box and tilt the box up slightly to remove
it.

Assembling the Crisper Support Box

1
Use one hand to support the bottom of the
crisper support box while aligning the inner
edge of the box with the groove inside the
refrigerator. Lower the box into place.
2
Angle the crisper cover into the refrigerator
and then lower it into place.
3
Slide the crisper cover back until it stops.