Replacing The Water Filter - LG Signature LUPXS3186N Manual Del Propietário

Ocultar thumbs Ver también para Signature LUPXS3186N:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

48
mAINTENANCE

Replacing the Water Filter

NOTE
This refrigerator does not require a filter
bypass plug when the filter is not in place.
Replace the water filter:
Approximately every six months.
y
When the water filter indicator blinks.
y
When the water dispenser output decreases.
y
When the ice cubes are smaller than normal.
y
1
Remove the old water filter.
Lift up and remove the lower door bin. Swing
the right end of the water filter out of the
compartment and then grasp and rotate the
filter counterclockwise to remove it from the
filter head.
NOTE
Replacing the water filter could cause a
small amount of water to drain. Place a cup
under the filter head to catch any water.
2
Replace with a new water filter.
Insert the new filter into the filter head and
rotate it clockwise until the arrow on the
new filter lines up with the arrow on the
filter head. Swing the filter back into the
compartment.
3
Assemble the door bin.
After changing the filter, push and hold the
Water Filter button for three seconds to reset
the filter.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Signature lupxc2386n

Tabla de contenido