Attaching Canopy (Certain Models) - Graco ISPC021BC Manual Del Propietário

3.5 Attaching Canopy (on certain models)
1. Infant restraint comes with four (two
on certain models) identical canopy
support parts.
Thread one canopy support completely
through one sewn tunnel
2. Slide straight end of a second
support into the straight end of the
first support
3. On models with four canopy supports, repeat
steps one and two for the other canopy tunnel.
The canopy should appear as shown
4. Attach canopy in the areas between the
infant restraint and the handle base
To remove canopy:
Pull the canopy fabric back.
With both thumbs on the
center of the canopy bow,
wiggle back and forth while
pulling out on the two parts
of the canopy bow š.
–
—
.
.
˜
.
™
.
14
–
—
˜
™
š