4.
Repeat step 3 for LATCH with
adjustment belt. After fastening onto
storage bar, pull on adjustment belt to
make sure LATCH is securely
fastened.
5.
LATCH storage should look like this
when complete
7.3 Cleaning and Maintenance
TO REMOVE AND WASH INFANT RESTRAINT PAD, follow
instructions in "6.1 Positioning
Harness Straps", p. 27-30.
On 5-point harness models,
push aside the small tab that
holds the anchor buckles in
place
and pull the anchor
buckles out of their indentations.
Push a corner of each anchor
buckle back into its slot
.
.
42
Underside of base