Kohler K-922 Guia De Instalacion página 10

O-Ring
6. Assemble the Spout
- Slide the cartridge assembly onto the orifice O ring until it fits
snugly. Install the cartridge assembly/orifice into the mounting
sleeve and align the holes. Install the three screws and tighten until
the sleeve and orifice are tight against the wall.
- Thread the decorative flange clockwise into the orifice and
hand tighten until secure against the wall.
E
1006741-2-
Installed Mounting
Sleeve
Cartridge Assembly
Orifice
Screw
Decorative
Flange
10
Kohler Co.