Remote Control - Panasonic CW-XC103VU Instrucciones De Uso

3
ACCESSORIES

• Remote control

• and frame
REMOTE CONTROL
1 Signal Transmitter
2 OPERATION button
3 TEMPERATURE/TIMER setting button
4 TIMER button
5 TIMER SET/CANCEL button
6 MODE selection button
7 ECONOMY Button
8 AIR SWING button
9 Fan Speed Selection Button
4
Ensure that the power
plug is securely inserted.
A loose plug may cause a
fire or an electric shock.
HOW TO INSERT BATTERIES
1
Open the cover.
Do not use rechargeable (Ni-Cd) batteries
because such batteries differ from the standard
CAUTION
dry cell batteries in shape, dimension and
performance.
5 OPERATING THE UNIT
OPERATION
OFF/ON
OPERATION
SETTING DISPLAY TEMPERATURE
TEMP/TIMER
Display will
change
according to
the setting.
TEMP/TIMER
NOTES
• The latest temperature setting will be memorized and will
appear on the display the next time it's turned on.
• The display temperature selection is for display purpose only
and does not indicate actual room setting temperatures. Your
room temperature may not necessarily match the displayed
temperature.
SELECTING FAN SPEED
COOL
MODE
FAN
FAN SPEED
NOTE
• The latest fan speed setting will be memorized and the indicator
will light up the next time the unit is turned on.
• Two R03 dry-cell batteries
NOTES
WARNING
• If the unit is not going to be used for an extended period of time, remove the
• If operation is stopped, and to be restarted immediately, the unit will resume
2
3
Insert the two batteries.
Start operation
°F
OPERATION.
hr
The operation will turn on and the
display panel will light up.
°F
To stop the operation, press the
hr
OPERATION again.
The unit will stop operating and the
display panel light will turn off.
Press TEMP/TIMER
°F
display temperature.
hr
The temperature can be set between
60°F and 86°F.
Recommended temperature:
75°F ~ 78°F.
Press FAN SPEED to choose the
speed level of the fan.
HIGH
The indicator will light up and the "beep"
MED
sound will indicate changing setting.
LOW
Be sure to observe the following:
• Aim remote control at control
panel on air conditioner when
1
operating.
• Do not drop or throw the remote
2
OPERATION
control.
3
TEMP/TIMER
• Do not place the remote control
SET/
TIMER
CANCEL
4
5 in a location that is exposed to
6 ECONOMY
MODE direct sunlight or next to a heating
7
AIR SWING FAN SPEED
unit or other heat sources.
8 9
Panasonic
power plug. Otherwise, approximately 2.5W of electricity will be used even if the
unit has been turned off using the remote control.
operation only after 3 minutes.
ABOUT THE BATTERIES
• The batteries can be used for approximately one year.
• Be sure to replace the batteries with two new identical
batteries.
• Remove the batteries if the air conditioner will not be used
for an extended period of time.
Close the cover.
SELECTING OPERATION MODE
by pressing
HIGH
MED FAN SPEED
LOW
or to set the
MODE
ADJUSTING HORIZONTAL AIR FLOW DIRECTION
AIR SWING
AIR SWING
• Maximum distance : 10 m
Press MODE to select the desired
operation .
COOL
The indicator will light up and a "beep"
sound will indicate changing setting.
FAN
COOL mode
To set room temperature to your
preference of cooling comfort.
FAN mode
To provide air circulation without cooling
the room.
During Fan operation, temperature
setting cannot be selected.
Press to select AIR SWING.
The air circulation will automatically move the
horizontal louvers left and right for better air
distribution around the room.
NOTE
Using your hands to adjust the direction may cause
the louvers to malfunction. If this happens, stop
operation immediately and restart.
NOTE
Vertical adjustment of the airflow direction
Vertical
is done manually.
louvers