MRA 4025066171279 Instrucciones De Montaje página 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen (ROC / CU)
1 Holder kit (HK)
Mounting the roadshield ROC to the handlebar:
1. Place the motorcycle on a flat surface.
2. Mount the holder kit as shown on pictures P1, P2, and P3.
3. Mount the roadshield to the holder kit and adjust the required angle and the height of
the screw before tightening the screws.
Mounting the customshield CU to the handlebar:
4. Place the motorcycle on a flat surface.
Mount the holder kit as shown on pictures P1 and P4.
5.
6. Mount the customshield to the holder kit and adjust the required angle and the
height of the screw before tightening the screws.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
BMW R18 2021-
Article No.
--- Allen key 3mm, 4mm, 5mm
4025066111268
3
Required tools