Wifi Configuration - Venta AP902 Manual De Instrucciones

WIFI CONFIGURATION

To access WiFi configuration, first tap button 9,
Select Network:
VENTA
Security type:
PSK:
Access:
CONNECT
Select "Select network", then your network in the dropdown list. The "Security type"
is automatically set as soon as you select the network. In the "PSK" box, please
enter your WLAN password/key (ASCII entry mode) and confirm with ENTER. If
your password contains special characters or umlauts which are not shown on
the keypad, you can generate your full password as a HEX code on our website:
www.venta-air.com. Now enter your generated HEX code into the "PSK" box (HEX
entry mode) and confirm with ENTER. Under "Access", select the internet access
type you require.
full access: access to all the comfort features of the app.
local access: local access to use the app.
Tap CONNECT to create the WiFi connection.
WiFi symbol green: WiFi connection established (local access).
WiFi symbol blue: WiFi connection established (full access).
WiFi symbol red: No WiFi connection. Check your network and WLAN password.
WiFi symbol grey: WiFi disabled.

If problems occur during the setup process, read the information in the section
"What to do if WiFi connection is not possible?"
Tap the EXIT button to return to the previous menu.
26 EN
WIRELESS NETWORK
LOGIN CREDENTIALS
WPA / WPA2
***********
INTERNET ACCESS
full access
then the SETUP button.
FW: 1.001.002
MAC: f8.f0.05.fb.c4.71
IP: 0.0.0.0
EXIT